V4.4 / Quick Hit / Firing Range Setup

QUICK HIT PRACTICE - FIRING RANGE SETUP

Improve your speed and accuracy using the LaserHIT app's specific 25M and B27 LaserHIT paper targets. Various drills such as drawing from concealment, drawing from a holster, ready-up drills, and more are available to enhance your performance. Track your scores and timing for single draws, utilizing augmented reality to reload and reset your practice directly from the firing line.

Glossary

  • Firing Distance: The actual distance from the target to the firearm's front iron sight or front lens (red dot, scope).

  • Target Scale: The ratio between the size of the actual target and its representation used for practice. Automatically calculated by the LaserHIT app.

  • Simulated Distance: The calculated distance is derived by multiplying the Firing Distance by the Target Scale factor. This is automatically determined by the LaserHIT app based on your input for Firing Distance and confirmed target scale.

  • Instrumental Precision: The smallest increment the app can reliably detect and measure.

Specification:

  • Distance Units Support: Feet, Yards, Meters

  • Simulated Distance Range: 3-264 feet, 1-88 yards, 0.9-80.5 meters

  • Firing Distance Range: 3-52.8 feet, 1-17.6 yards, 0.9-16.1 meters

  • Target Scale Support: 1:1 to 1: 5

  • Measurements and Calculation: Simulated distance

SET UP FIRING RANGE

Firing Distance: Select the units (Feet, Yards, or Meters) and enter the actual distance value for your firing line. It is crucial to accurately enter this distance as it directly affects the calculated simulated distance and your practice results. Iron Sights: Enter the distance from the front sight. Red-dot or Scope: Enter the distance from the front lens. Tap the field to open the phone's keyboard for input. Tap "Done" to confirm and return to the Firing Range setup screen.

MORE SETTINGS

Common Settings:

  • Hit Size: Adjust the slider to resize or enlarge the graphical representation of hit marks on your targets displayed on the phone screen.

  • Hits (max 1): Set the maximum number of hits that can be registered per target.

  • Timeout (max 300 sec.): Set the time limit (up to 300 seconds) for completing each practice session.

  • Restart Minimum Delay (range 1-10 sec.): Customize the minimum delay (1-10 seconds) before starting each practice session.

  • Restart Maximum Delay (range 10-30 sec.): Customize the maximum delay (10-30 seconds) before starting each practice session.

  • Express Setup (Skip Hints): Quickly start LaserHIT practice sessions without visual and audible hints. Simplifies setup into two steps: confirming the Reload Mark and checking lights, then confirming the specified 25M or B27 target.

Sensitivity Settings

These settings are designed and implemented to support various Android devices running outdated operating systems, or categorized as "budget" phones. They can be particularly useful when using OTHER laser cartridges or devices for training to balance technical characteristics. They may also be beneficial under limited environmental setup conditions such as low light sources, uneven floors, or surroundings with many windows or glass doors. In general, we recommend keeping these settings at Medium and avoid changing them. If you have any uncertainties, please submit a Technical Support request to the LaserHIT Customer Support team at: https://www.laserhit.com/support.

  • Laser Hits (Low, Medium, High):

    • Low settings may result in missed hits, while High settings may register "phantom" hits.

    • Recommended to set to Low for lasers exceeding 5mW and High for laser Class 1-2.

  • Ambient Light Change (Low, Medium, High):

    • Low settings may register "phantom" hits, while High settings may trigger a "Stand by" action, pausing the session.

  • Phone or Target Movement (Low, Medium, High):

    • Low settings may register "phantom" or misplace hits due to phone or target movement.

    • High settings may trigger a "Stand by" action or result in longer waiting times between steps.

  • Moving Shadow on Target (Low, Medium, High):

    • Low settings may register "phantom" hits, while High settings may cause a "Stand by" action, pausing the session.

Global Settings

These settings are designed to support a variety of Android device hardware configurations and their compatibility with software applications.

  • Loud Sound Test: The loud sound produced by the phone's speaker may interrupt practice sessions. An initial sound test adjusts the device's volume for accurate hit detection. If the phone volume is later increased above the tested "safe" sound level, the app will prompt to perform the sound test again.

  • Laser Color (Red, Green, Blue, Auto): We recommend keeping the default value: Auto. The app automatically detects and notifies you if adjusting the laser color is necessary for better performance and accuracy with your OTHER laser cartridges/devices.