GLOSSARY

  • Sight to Target Distance: Actual distance from a target to firearm’s front iron sight or front lens (red dot, score).

  • Target Scale Factor: ratio between size of actual target and a representation of that target.

  • Simulated Distance: result of Sight to Target Distance multiply by Target Scale Factor.

  • Instrumental Precision: The smallest increment the app can detect and measure reliably. The value will be calculated in a runtime and determined by the target size on the phone screen and Simulated Distance to the target.

  • MOA/IPHY: Shooters Minute Of Angle (Simplified TMOA). One SMOA is equal to 1 inch at 100 yards.

  • Units, MIL/NATO-MIL: (Simplified MRAD). One MIL is equal to 1 meter at 1 kilometer. 0.1 MIL is equal 10 cm at 100 meters.

  • Hits Group: The maximum distance between any two hits on the target (center-to-center), at the simulated distance on the target.

  • First Focal Plane Reticle: A first focal plane (FFP) reticle changes size according to the target size on the phone screen.

SPECIFICATION

  • Distance Units supported: Feet, Yards, Meters

  • Simulated Distance range: 3-480 feet, 1-160 yards, 0.9-148 meters

  • Sight to target distance range: 3-30 feet, 1 - 10 yards, 0.9-9.1 meters

  • Target Scale supported: 1:1 - 1:16

  • Measurements and calculation: Simulated Distance, Instrumental Precision, Hits Group

  • Units for measurement: Inch, cm, MOA, MIL

  • Instrumental Precision, angular: up to 0.1 MOA, 0.03 MIL

  • Instrumental Precision, linear: up to 0.02 Inch, 0.05 cm

  • First Focal Plane Reticle: Inch, cm, MOA, MIL

SET UP FIRING RANGE - BASIC SETUP

Sight to Target Distance: Select units (Feet, Yards, or Meters) and enter the distance value. For iron sights, enter the distance from the front sight. For a red-dot or a score, enter the distance from the front lens. Tap anywhere on the screen to close the keyboard.

Target Scale Factor: If the field is present, enter your target scale factor. For example, if you have a target with scale 1:4, enter 4. The app will calculate Simulated Distance in selected units. If the field is missing, the app will determine the scale factor and calculate the simulated distance in real-time during the practice.

Units* - The app will measure hits Group in selected units with Instrumental Precision calculated in real-time. For better results, use an HD-type laser cartridge, a small target with a high Scale Factor, and increase the Sight to Target Distance.

Group - measures the maximum distance between any two hits on the target (center-to-center) in units selected above.